================================================================================
  Datalogic Genius Release 1.16 README file
  July 2017
================================================================================

TABLE OF CONTENTS

1. System requirements

2. Installation troubleshooting

================================================================================


1. System requirements
======================

To execute Genius it is necessary for the system to satisfy the following 
minimum requirements:
- Operating System: Windows NT4 (SP 6a installed), Windows 2000, Windows XP,
  Windows Server 2003, Windows Vista, Windows 7 (both x86 & x64), Windows 8/8.1,
  Windows 10
- Internet Explorer (version 5 or greater) installed
- At least 64 MB of RAM
- At least 200 MB of free disk space (more space is needed for optional .NET 
  Framework 2.0 installation)
- CD-ROM Drive (if installing from CD)
- Some components (Add-ons) may in future require additional system resources 
  not included in the preceding list.


================================================================================

2. Installation troubleshooting
===============================

Important notice
----------------
Make sure you close all running applications, before attempting to install 
Genius, even background programs displayed in Windows Icon Tray (e.g. some 
antivirus agents).


2.1 - MDAC setup program may behave in a strange looped way during Genius Setup

In some cases, the MDAC (Microsoft Data Access Components) installation program
that is automatically invoked by Genius setup, may conflict with previous
installations of other applications, if they left some setup files into Windows
temporary directory. 
These can cause problems to MDAC setup program, that sometimes may behave in a
strange way, often looping through the same set of dialogs, even rebooting the
system.

Workaround
----------
Manually remove all files in your Windows temporary directory (e.g. 
C:\Windows\Temp).


2.2 - "Path/File access error" just after started Genius under Windows NT/2K/XP

If the user currently logged on Windows is not the same that had successfully 
installed Genius, and if has not enough privileges to manage the file system 
(for example to create folders), the application cannot perform some essential 
operations during first-time startup and warns the user with a message 
"Path/file access error".

Workaround
----------
Contact your system administrator to give more privileges to your user account 
(Genius users should be a "Power" user in Windows 2000/XP).


2.3 - GenSetup does not show README nor install packages located into Packages 
folder of the installation media, if Windows 95 with IE version less than 5

The custom actions that perform package installation and display readme require 
the file OLEAUT32.DLL version 2.40 or later to be successfully installed in the 
system.
The file is actually part of Genius Setup but it will be completely registered 
only AFTER the system is restarted, whilst custom actions run BEFORE system 
reboot and therefore cannot execute successfully.

Workaround
----------
After system reboot, uninstall Genius and install it again.


2.4 - Message "The feature you are trying to use is on a network resource that
is unavailable" when launching Genius.

It simply means that Windows Installer cannot find a required file installed 
with Genius, maybe it has been manually deleted or moved.

Workaround
----------
Cancel the messagebox and don't care of the subsequent messages.
Then install again Genius from the original CD. In the Maintenance Setup dialog,
choose "Repair".


2.5 - Error message "One or more components are not correctly registered. 
Reinstall the application." when launching Genius for the first time.

If GENIUS.LOG contains error message "Provider cannot be found", probably
the Microsoft Jet OLEDB Provider for ADO isn't correctly installed.

Workaround
----------
Download the latest Jet Service Pack from Microsoft site and install it.


2.6 - Same error above, followed by "unknown software exception (0xc000008f)".
Applies to OS: XP or 2K; McAfee VirusScan Enterprise 8.0i is installed.

This is very likely caused by McAfee On-Access scan.
McAfee is currently investigating this issue and maybe will release a service 
pack.

Workaround
----------
In On-Access Scan properties for All processes, tab "Detection" make sure
"What to scan" is set to "Default + Additional file types", and not "All files".


2.7 - Wrong characters (e.g greek) displayed for binary parameters.

The font MS LineDraw is not properly installed.

Workaround
----------
Make sure LINEDRAW.TTF is installed in Windows Fonts. If it isn't, simply copy
it to Windows Fonts folder (\Windows\Fonts).


2.8 - Readme not shown and "Bad file name or number" error after installation 
completed when run GENSETUP.EXE from a network share.

Custom actions launched by Microsoft Installer run in LocalSystem user account
context, having no network access except from "null session shares".

Workarounds
-----------
- Copy Genius installation folder to local disk, or
- Add network share to null session shares. Refer to the following MSDN article:
  http://support.microsoft.com/kb/289655
  
  
2.9 - Error installing Microsoft .NET Framework 3.5 SP1 (return code 0x800F0906)

It can occur in the following systems: Windows 8/8.1, Windows Server 2012/2012 R2.

Resolution
----------
Make sure your internet connection is working. First, try to connect Microsoft
Update website: http://www.update.microsoft.com

More info
----------
See following KB article from Microsoft: https://support.microsoft.com/kb/2734782